eMail Login  
 

EVA - Fast Curing EVA

Product explanation

  • Surface: There are two kinds of surfaces of Fast Curing EVA - smooth plane surface and the rhombic surface.
  • Thickness: All from 0.10mm to 0.80mm can be supplied, but EVA with 0.10-0.35mm thickness can only be provided with smooth plane surface, 0.40mm and the upper thickness can be supplied the above two different surfaces. 0.5mm thickness is normal product whose rhombic surface can reach 0.66 thickness.
  • Width: We can supply any width within 1700mm and the general width is 280.350, 540, 670, 810, 820, 980, 1000mm etc.
  • Length: Generally 100/150 meters per roll, or else as your requirement.

Technical data

 

Properties Test Method Unit Fast Cure
F406 F806
Density ISO 1183 g/cm³ 0.96 0.96
Tensile Stenght ISO 527-3 MPa 16 16
Elongation at break % 550 550
Young’s Modulus (cured) MPa 4.7 4.7
Hardness GB/T531-1999 Shore A 72~75 72~75
Optical Transmission (390-1105 nm) ASTM D1003 % >92.0 >92.0
Refractive Index ISO 489 -- 1.481 1.481
UV-Cutoff Wavelength** UV-Vis` nm 310 360
UV Light resistance280nm~385nm, 15KWh/m² Q/HZF 001-2006 %TransmissionRetention >88 >90
Heat/Humidity Resistance85ºC/85RH, 2000h
>88 >88
Cross-Linking Rate
Gel % 75-85 80-90
Strength Peeling (Glass)
N/cm >60 >60
Strength Peeling (TPT)
N/cm >40 >40
Shrinkage Rate (120ºC, 3min)
MD / TD % <4.0/<2.0 <4.0/<2.0
Water-absorbing Rate GBT/T 1034-1998 % <0.1 <0.1
Volume Insulating Resistance GBT/T 1410-2006 MΩ 1.45x106 1.45x106
Range of Thickness GBT/T 6672-2001 mm 0.3 - 0.8 0.3 - 0.8
Range of Width -- mm 250-2,000 250-2,000
Surface Finish -- -- Embossed (Single or Double Side)

 

Fast Cure - One Step Method

 

Lamination Condition F406 F807
Hot Plate Temp (C) 142 (140 - 148) 145 (140 - 150)
Vacuum Time (min) 5 - 7 3 - 5
Press Time (min) 12 - 15 8 - 12
 
   
  Home | About Us | Products | Services | Feedback | Career | Order | Contact Us